LED security lights is a part of 's continuing pursuit for creating highly efficient and convenient products for our customers.

A more sensitive, durable aluminum material design, will give you a better experience.

Also it is powered by LED lamp beads, ensure to provide better illumination(soft light, anti-glare); IP65 Waterproof, perfect for your outdoor usage.

TEST MODE

Tests the sensor’s functionality even during daylight hours.

After motion stops, the light will remain on full brightness for 5 seconds and then turn to low brightness.

Adjust the “DISTANCE” to L/M/H, you will enter the SECURITY MODE.

Turns on at full brightness at night only when motion is detected.

Deactivates during daylight hours. Recommended installation height: 8.2 feet

In D2D mode, light turns on at night and stays on at low brightness(20%), then turns to fullbrightness(100%) if motion is detected.

The holding time at high brightness can be customized from 1/3/10 MIN.

Deactivates during daylight hours.

Stay on at 100% brightness, suitable for nighttime gatherings in the courtyard.

Turn the light on manually from the wall switch. With the fixture already in the ON position, continuously flip the wall switch off and then back on twice in 3 seconds.

Warm tips:

Manual mode requires a wall switch to operate, please make sure that the light fixture in your home is equipped with a normal switch, not only controlled by the sensor.

When the security light is triggered, the lighting time is 1, 3 or 10 minutes, which can be customized by yourself.

Durable aluminum design, can spread the heat effectively and increase the lifespan up to 50,000+ Hours.

3 X 18AWG Wire connectors

2 X Outler Box Screw

1 X Mounting Bracket

1 X M4*50 Fixture Screw

1 X M4*35 Fixture Screw

1 X Rubber Stopper

1 X Gasket

A1: No. This is a hardwired light that needs to be connected to your home electrical system.

A2: This is normal in Auto Mode or Dusk to Dawn Mode. Use Test Mode for daytime testing.

A3: Absolutely! It’s IP65 waterproof and designed for all outdoor conditions.

A4: The light has a Manual Override Mode for constant-on. Use Manual Override Mode by quickly flipping the wall switch OFF and ON within 3 seconds.

To activate: Flip the wall switch OFF → ON → OFF → ON within 3 seconds. The light will stay on at 100% brightness for 6 hours, then return to motion sensing. Note: This only works with a wall switch. Smart plugs or motion-only controls may not support this feature.

TEST MODE

A1:

hardwired light

A2:

A3:

IP65 waterproof

A4:

Manual Override Mode

Manual Override Mode

OFF → ON → OFF → ON

6 hours

Product description

From the brand